Technical Information Sheet

 

AVIRON GRAFFINET VARNISH

PERMANENT SYSTEM

                                                                                               SATINE                       - REF.: 248 850

                                                                                                                        HIGH GLOSS              - REF.: 248 800

                                                                                                                                     MATT                                      - REF .:248 870

 

AVIRON GRAFFINET VARNISH is a 2 component polyurethane varnish

AVIRON GRAFFINET VARNISH is highly resistant against bad weather conditions and chemical aggression.

Graffiti’s can easily being removed with AVIRON GRAFFINET cleaner (Ref.: 505 180) without damaging the base coating.

A maximum protection is achieved within 72 Hr after application at  20°C – humidity  50%.

 

CLASSIFICATIE

AFNOR T. 36 005 - 9/1989 - Category I - Class 6A.

 

KENMERKEN VAN HET PRODUKT

Density of the mixture                                  : 1,01

Contend dry product in weight           : 49%

Contend dry product in volume          : 42%

Mixture density                                           : 30"

Flame point                                                 : > 21°C

Presentation                                                : 2 component varnish

colour                                                         : transparent

Theoretical usage                    

   Flat surface                                              : 125/175 g/m²

   Rough surface                                          : 200/250 g/m²

Packaging                                                    Base -         hardener

                                                                                     Ref.: 506 8060

  Kit of  7 kg                                                 :   5 kg        2 kg

  Kit of 14 kg                                                :  10 kg       4 kg

Usage                                                         :  Temperature > 10°C

                                                                   :  Humidity < 85 % 

Mixing parts                                                :  Base -      hardener

                                                                      100  -         40

Time before application after mixing   :  10 min

Pot life                                                        :  6 u at 20°C

Application time between layers at  20°C

   - minimum    :  8Hr

   - maximum    : 72 Hr

               Dry time at 20°C, humidity  < 60%   :

                  Dust free      :  1 Hr

                  Dry               :  4 Hr

                  Hard            : 24 Hr

 

SURFACE PREPERATIONS

 

Remove oil, grease and all impurities from the surface, gloss surfaces needs to be roughened (DTU.59.1.) Check adhesion ( NFT 30 062).Clean surface to be protected, by chemical or sand blasting as all impurities will remain visible once this protection is applied and can no longer be removed

 

 

SURFACE TREATMENT :

On bricks and porous stone apply 2 layers of AVIRON FIXADER (Ref. 308 800)  until the surface is fully absorbed with the product. If the finishing layer is applied directly to the surface it will result in “ wet look” finishing

Paint over after 24 Hr.

 

FINISHING COTE :  apply 1 or 2 layers AVIRON GRAFFINET VARNISH

 

REMARKS

 

If the surface is not well impregnated it may result in enclosed ( white) spots.

 

APPLICATION CONDITIONS

 

                                                AIR-LESS                     PNEUMATIC               BRUSH/ROLLER

 

 Pressure paint (bar)                          120                                2 bar

 

 Air Pressure (bar)                                                                   4 bar

 

 Diameter spray nozzle (inch)    13/1000e"                      1,2 mm

 

 Viscosity at use                                                                                          Ready to be used

 AF/20°C                                            

                            

 Deluting                                             0 tot 5%                         5%

 505 0346

 

USE

- Mix the base well with the hardener Ref. 506 060

- Only mix the quantity needed for about 6 Hr work.

- Apply the product in crossed layers.

- Do not apply in full sun or heated surfaces.

- Tools and spots can be cleaned with diluting product Ref.505 346.

- Due to the fact that this product has an extremely adhesion and fast drying time , wear gloves at all time .

 

 

SAFETY AND HYGIENE

Safety descriptions will be end on demand.

 

The Information submitted in this publication Is based on our current knowledge and experience, In view of the many factors that may affect processing and application, these data do not relieve processors of the responsibility or carrying out their own tests and experiments; neither do they imply any legally Binding assurance of certain properties or of suitability for a specific purpose. It is the responsibility of those to whom we supply our products to ensure that any proprietary rights and existing laws and legislation are observed.

 

 

 

 

ADMIN OFFICE :                                                                                                        Authorised dealer for

De Vrierestraat 52 – 2000 Antwerp - Belgium

Tel : ..3232486355  - Fax : ..3232486535                                                                                                        

e-mail : Info@aviron-products.com

webside :         http://www.gevel-renovatie.com/

Bank name: LETVIA  “TRASTA KOMERCBANKA” - Account : 1-111-2-10959-1