Productnaam :

Artikelnr : 10810

AVIRON XETALCLEAN I

FILMOGENE CLEANING PASTE

Description and application

AVIRON XETALCLEAN is a mechanical cleaning past to remove smoke stains, soot, dirt dust and nicotine from interior walls, statues , natural stones , marble , plaster statues , wood and bricks  When applied if forms a film that after drying can be pealed off and all pollution is removed with the film

Two standard formulas are available : AVIRON XETALCLEAN I and AVIRON XETALCLEAN II (contains  EDTA).
Depending on the surface more types can be offered after testing.

Advantages

Deep cleaning

No chemical reactions

User friendly without disadvantages of water application.

Fast, can be sprayed.

Existing salts are not returned in the surface

Application

AVIRON XETALCLEAN is a thick paste and is applied with a long hair bruch, spachtel, roller or sprayed.   The min application temperature is 8°C.  soot and dirt are well absorbed if applied by rotating the brush on to the surface.  The ideal thickness is between 0.3 tot 0.6 mm, depending on the roughness of the surface. AVIRON XETALCLEAN is light beige and become more transparent when drying, this indicating the forming of the film.  We advice to let it dry for min. 24 Hr and max. 36 Hr.  Do not apply on hot surfaces.

The ammonium contend of0,5% will evaporate after application so it will not have damaging effects.

USE

0.5 kg to 2 kg/m² depending on the surface

Remarks

AVIRON XETALCLEAN may not be stored longer than 24 Hr in direct sunlight and may not be dilutted.

The film is environmentally safe unless the surface to be cleaned contained dangerous substances

Technical
Specifications

Viscosity

mPa.s/20° C, Brookfield LVF : 1500

pH

7,8

pH 1% diluted in water

/

Relative desity/20° C

0,999 (depending on type)

Active material, %

12,07

Ammonia -contented

0,5 %

Pulling strength (mPa)

30

Elasticity at rupture, %

900

Dry material

60,5 (depending on type)

Storage : 6 months in sealed packaging (+5° C tot +20° C) in dark area

Cleaning tools

With plenty of cold water and soap peal off tools after use and complete polymerisation

Safety

Ware protective clothing and have sufficient ventilation

Packaging

8 kg

Aanmaak fiche: 20/09/00