TECHNISCHE
FICHE
AVIRON PROTECTGUARD®
CHEMICAL
BASE : Copolymere acryl in
liquid condition, No solvents, no silicone or equal
EIGENSCHAPPEN : Water- and oil repellent product
, with ant-stick and Anti-graffiti characteristics Suitable for all porous
building materials : non flammable
Cans
of 1, 5, 10 en
Do
not stock below
APPLICATION : Ecological protection product against pollution,
stains of all sorts, graffiti.
AVIRON
PROTECTGUARD® can be applied on all surfaces horizontal, vertical in or
outside.
Will
not change the aspect of the material it is applied upon.
USAGE : AVIRON PROTECTGUARD® is ready for
use . It can be applied with a low
pressure unit, brush or roller , it may be applied on humid surfaces .
AVIRON
PROTECTGUARD® must be applied until the surface is saturated in one or two
layers wet in wet.
Optimal
conditions are achieved within 5 to 7 days drying time .
Cleaning
of tools with water.
RECOMENDATIONS : Only apply on dust free surfaces end
free of atmospheric pollution. To obtain
an optimal result only apply if the surface temperature is not lower than
ADVICE : To maintain a surface protected with
AVIRON PROTECTGUARD® one may use natural
soap and classical cleaning products. To remove graffiti’s use a product from
the AVIRON CLEANING range and rinse with water.
AVIRON
PROTECTGUARD® is resistant against acids , solvents etc and will remain
protective even after several cleanings and does not to e applied again.