Productname :

: AG/120100

B-WAX

 BIOLOGICAL SEMI-PERMANENT

ANTI GRAFFITI COATING OP WAX BASE

Description

B-WAX is a biological semi-permanent ANTI GRAFFITI COA­TING on wax basis to be used on surfaces needing protection against graffiti and other pollution B-WAX has

After hardening the characteristic to be very resistant to ink’s and paints. The graffiti can simply be removed with hot water. After removal of the graffiti the area must be treated again with B-WAX so that is again protected. B-WAX is vapour passable and after harding nearly invisible.

Aplications

Applicable on all porous surfaces , bricks, concrete, natural stone etc..  It is also applicable on most of the paints.  B-WAX can also be applied inside if it does not give problems in removing graffiti’s with high pressure and hot water ( swimmingpools,etc..)

Surface

Clean the surface carefully so that all impurities are removed.

Application

Stir well , B-WAX must be applied in cross layers wet in wet with a 2 Hr intermezzo apply 2 layers, one can use , brush, low pressure pomp or roller. After applying the first layer ( depending on the temperature ) one is allowed to let this layer dry for 2 Hr .  Than a second layer is applied . It is recommended to cover doors and windows stains can be removed with water. B-WAX is applied ready for use and must not be diluted.

REMOVING GRAFFITI

Apply a high pressure cleaner with hot water application, use min. 75 bar and a temperature of min 90° C .B-WAX will melt and also the graffiti.  After removal apply an new layer of B-WAX.

Usage

Depending on the surface max. 0.5 l/m˛

Surface                            Layers                      total Use

Plaster paints,

Wood, glazed stone, etc.           2                                  0.15 l/m˛

Bricks, concrete etc..                2                                    0.2 l/m˛

Sandstone and very

porous materials                       2                                  0.3 l/m˛

These figures are indications only , to be sure traet a test area.

REMARKS

Indications for application of high pressure cleaner:

Type Paint                    max. temperature                      max. pressure in ATM

Acryl                            70° C                                       40 atm

PU                               85° C                                       70 atm

Epoxy                          85° C                                       65 atm

High Solid                     75° C                                       45 atm

Technical spec

Application temperature is between 5 and 35° C.  B-WAX can be stored max.l 12 months in closed original packaging frost free

Safety

B-WAX is non flammable biological and does not contain solvents it is safe for man and animals.

Packaging

10 Litre                                                                                                20/08/99

.


. Onze adviezen, in woord, geschrift of dmv proef mbt technische toepassingen, worden naar best  weten verstrekt. 

Dit productinformatieblad is met de grootst mogelijke zorg opgesteld.  Wij kunnen geen aansprakelijkheid aanvaarden voor schade, van welke aard of omvang ook, welke door het gebruik van deze gegevens of van het desbetreffend product zou kunnen worden veroorzaakt.  Wij geven ook geen enkele garantie voor vrijstelling tegen patentinbreuk.  Steeds Veiligheidsfiche raadplegen. 

Tel anti-gifcentrum : 070/245.245