AVIRON SEALING MASTIC

 

Article No. PP 9710

 

Product base:

One component sealing mastic on basis of non toxic base

Applications

Water- and gas tight sealing of cable and pipe pass troughs, concrete connections etc according to NEN 2768 below ground level

 

Characteristic

-          is permanent elastic; therefore new cables, pipes etc can at all times be replaced or added trough the sealed pass trough

-          is environmentally friendly at application and use

-          increases, when in contact with water, in volume, therefore a permanent water and gas tightness is guaranteed even at extreme displacements

-          sticks to at almost any surface, even when wet

-          is absolutely watertight

-          is gastight

-          not frost sensitive

-          non toxic

-          is indefinitely maintainable

-           

Physical and Chemical properties

 

Colour                                                                    green

Form                                                                      pasteuze mass

Sent                                                                       non

Specific weight (21°C)                                            app 1.2 gr/Cm³

Melting point                                                           not applicable

Boiling point                                                            not applicable

Durability                                                                indefinitely

Max processing temp                                             40 °C

Min processing temp                                              10 °C

Reduction                                                               N.a

Skin irritation                                                           N.a

Eye irritation                                                           N.a

Toxic                                                                      N.a

Chemical resistance                                               excellent

Aggressiveness                                                     N.a

 

Research reports

 

TNO-CIVO report V88.248/280061 ( no skin irritation)

TNO-CIVO report V88.249/280069 ( no eye irritation)

TNO-CIVO report V88.288 ( not toxic)

TNO-CIVO report 283/89 not aggressive for polyethylene)

TNO-CIVO report 715/89 ( watertight and gas penetration reduced)

 

Surface  conditions

 

Adhesiveness can be obtained on nearly every surface

The surface must be clean, free of loose concrete- ,sand-, bitumen-, oil-, or coating residue

The maximum underground temperature may not exceed 50 °C

 

Cleaning

 

First clean hand with paper towel or dry cloth, than clean with garage soap or natural soaps with water

 

Packaging

 

PE packaging 2 Kg

Tubes of 0.530 Kg ( prof application gun)

Tubes of 0.030 Kg ( prof application gun)

 

Tools

 

Professional application gun

Application knife

Paper gloves

Cleaning brush

 

Instructions for use

To seal off large conducts ( more than 106 mm) or for greater depth of pass trough ( more than 1.5 m) special application and sealing techniques have been developed contact your local representative for instructions

 

The statements above are compiled from our field of production and according to the latest technological developments and application techniques. Since application and working are beyond our control, no liability of the producer can be derived from the contents of this information sheet.

Any statements made beyond the contents of this information must be confirmed in writing by the producer.

 

In all cases, our general conditions of sale are valid.

 

With the publication of this Technical Information Sheet, previous editions are no longer valid.